Vitamin D3 for Life

Live Enlightened

Research libraryVitamin D3 For Life
Study design and methods

Secondary relevance to vitamin D This paper mainly addresses another topic and also reports a vitamin D analysis, result or scientific synthesis.

This paper mainly addresses another topic and also reports a vitamin D analysis, result or scientific synthesis.

Why this paper is included

Supporting source evidence:

Univariate binary logistic regression analysis investigating relationship between factors and osteointegration Factors | | B | S.E | Wald | OR, 95% CI | p-value: | On calcium/vitamin D supplements | 0.438 | 0.760 | 0.332 | 1.549 (0.350 to 6.684) | 0.564

Source: Results table. View original paper

Relevance classification does not establish study quality, causation or editorial approval.

Study design Study design awaiting verification.

Study design awaiting verification

The available source does not establish a sufficiently clear study design.

Meta-analysis unclear · Blinding unclear / not reported · Human research reported

How this paper was classified

Automatic source-based classification; awaiting editorial verification. This is not a quality score.

Patients were excluded if they had less than 2 years of follow-up or had TKA indicated for secondary osteoarthritis due to trauma, rheumatic arthritis, psoriatic or gouty arthropathy.

Source: Methods.

View supporting evidence in the original paper

What the study types mean
Systematic review
Uses explicit methods to identify, assess and summarise research on a defined question.
Scoping review
Maps the extent and characteristics of research on a topic.
Narrative review
Discusses existing research; systematic-review methods have not been established by this classification.
Review / evidence synthesis
Reviews existing research; the exact review methods need further assessment.
Randomised controlled trial
Assigns participants or groups to comparison interventions by chance.
Non-randomised intervention study
Examines an intervention without random allocation.
Cohort study
Examines exposures and outcomes over time within a defined group.
Case-control study
Compares people with an outcome against people without it, examining exposures.
Cross-sectional study
Examines a population at a particular point in time.
Observational study
Observes exposures and outcomes without assigning the exposure; the subtype is not established here.
Case report
Describes an individual case.
Case series
Describes a group of individual cases.
Secondary analysis
Analyses existing study data; this paper is not automatically another independent trial.
Laboratory study
Investigates biological processes in a laboratory setting.
Qualitative study
Examines experiences or meanings using qualitative methods.
Genetic instrumental-variable study
Uses genetic variation as an instrument to investigate relationships; this is not a randomised treatment trial.
Study protocol
Describes planned methods and is not evidence that the planned study has reported results.
Multiple reported designs
More than one design is explicitly reported; examine the supporting methods.
Study design awaiting verification
The available source does not establish a sufficiently clear study design.

Meta-analysis combines numerical results from studies. Blinding describes who was unaware of treatment allocation. Neither is a separate quality grade. Study design, vitamin D relevance and document format are independent filters.

Abstracts

Radiographic features of bone ingrowth in highly porous cementless total knee arthroplasty with minimum 2-year follow-up

Study design awaiting verification · Arthroplasty · 2026

Original publication title

Radiographic features of bone ingrowth in highly porous cementless total knee arthroplasty with minimum 2-year follow-up

Kai Chun Augustine Chan; Amy Cheung; Michelle Hilda Luk; Ka Chun Thomas Leung; Chun Man Lawrence Lau; XinYue Chang; Kwong Yuen Chiu; Henry Fu

© The Author(s) 2026

Original publication · Publisher record · CC BY 4.0

Source wording retained. Formatting, section navigation and display-title punctuation adapted for this research record.

Authors’ conclusion

In highly porous cementless TKAs with a 3D-printed titanium-coated implant system, bone ingrowth in the form of new trabeculae was observed in > 90% of knees, pointing towards satisfactory osteointegration. Osteointegration typically occurred between 4.5 and 8.9 months, with trabecular line formation and RLL disappearance. Bone remodeling from the stress shielding effect continued beyond 14 months, leading to zones of bone resorption.

An extract from the source publication. Read it in context.

At a glance

Abstract: What background does the paper provide?

The definition of successful osteointegration after cementless total knee arthroplasty (TKA) remains uncertain. We hypothesize that trabecular line formation, bone resorption, and radiolucent line (RLL) disappearance follow a temporal pattern after cementless TKA.

Source: Background

Abstract: What methods does the paper describe?

This is a single-institution retrospective radiographic study involving 221 consecutive patients (301 knees) who had undergone robotic-assisted cementless TKA for primary knee osteoarthritis. All patients had a minimum of 2 years of follow-up (mean 46.5 ± 12.4 months). All TKAs consisted of a 3D-printed titanium-coated tibial tray and cobalt chromium-coated femoral component, which were highly porous, allowing for biologic fixation. Primary outcomes were incidences of trabecular line formation, early radiolucent lines (RLL), and bone resorption. Secondary outcomes were (1) the temporal relationship in RLL disappearance, trabecular line formation, and bone resorption, (2) the relationship between factors with osteointegration, and (3) mid-term clinical outcomes in terms of radiographic alignment, postoperative complications, and revision rates.

Source: Methods

Abstract: Level of evidence

Level III (retrospective study)

Source: Level of evidence

Abstract: Results

Trabecular line formation was observed in 90.4% of knees and was most commonly seen medial (67.2%) and lateral (36.9%) to the tibial keel. RLLs were observed immediately following surgery in 33.6% of knees and were most common at the femoral anterior chamfer region, while bone resorption was most commonly found at the femoral anterior chamfer (41.2%) and the medial tibia (36.5%), indicating a stress shielding effect. Overall, new trabecular line formation occurred early in the postoperative course at an average of 4.5 ± 4.1 months, with bone resorption at a far later stage of 16.2 ± 11.4 months.

In knees with early RLL (n = 101), disappearance of RLL occurred at a mean of 8.9 ± 8.6 months postop and was preceded by trabecular bridging. In knees without early RLLs (n = 200), trabecular line formation occurred at an average of 4.0 ± 3.3 months postop, which occurred at an earlier time point than knees with early RLLs (p = 0.009). Timing of bone resorption did not differ significantly between groups (p = 0.221).

Radiographic alignment was maintained at post-op > 2 years with only two cases (0.7%) of revisions recorded.

Source: Results

Abstract: Conclusions

In highly porous cementless TKAs with a 3D-printed titanium-coated implant system, bone ingrowth in the form of new trabeculae was observed in > 90% of knees, pointing towards satisfactory osteointegration. Osteointegration typically occurred between 4.5 and 8.9 months, with trabecular line formation and RLL disappearance. Bone remodeling from the stress shielding effect continued beyond 14 months, leading to zones of bone resorption.

Source: Conclusions
Authors’ abstract

Background

The definition of successful osteointegration after cementless total knee arthroplasty (TKA) remains uncertain. We hypothesize that trabecular line formation, bone resorption, and radiolucent line (RLL) disappearance follow a temporal pattern after cementless TKA.

Methods

This is a single-institution retrospective radiographic study involving 221 consecutive patients (301 knees) who had undergone robotic-assisted cementless TKA for primary knee osteoarthritis. All patients had a minimum of 2 years of follow-up (mean 46.5 ± 12.4 months). All TKAs consisted of a 3D-printed titanium-coated tibial tray and cobalt chromium-coated femoral component, which were highly porous, allowing for biologic fixation. Primary outcomes were incidences of trabecular line formation, early radiolucent lines (RLL), and bone resorption. Secondary outcomes were (1) the temporal relationship in RLL disappearance, trabecular line formation, and bone resorption, (2) the relationship between factors with osteointegration, and (3) mid-term clinical outcomes in terms of radiographic alignment, postoperative complications, and revision rates.

Results

Trabecular line formation was observed in 90.4% of knees and was most commonly seen medial (67.2%) and lateral (36.9%) to the tibial keel. RLLs were observed immediately following surgery in 33.6% of knees and were most common at the femoral anterior chamfer region, while bone resorption was most commonly found at the femoral anterior chamfer (41.2%) and the medial tibia (36.5%), indicating a stress shielding effect. Overall, new trabecular line formation occurred early in the postoperative course at an average of 4.5 ± 4.1 months, with bone resorption at a far later stage of 16.2 ± 11.4 months.

In knees with early RLL (n = 101), disappearance of RLL occurred at a mean of 8.9 ± 8.6 months postop and was preceded by trabecular bridging. In knees without early RLLs (n = 200), trabecular line formation occurred at an average of 4.0 ± 3.3 months postop, which occurred at an earlier time point than knees with early RLLs (p = 0.009). Timing of bone resorption did not differ significantly between groups (p = 0.221).

Radiographic alignment was maintained at post-op > 2 years with only two cases (0.7%) of revisions recorded.

Conclusions

In highly porous cementless TKAs with a 3D-printed titanium-coated implant system, bone ingrowth in the form of new trabeculae was observed in > 90% of knees, pointing towards satisfactory osteointegration. Osteointegration typically occurred between 4.5 and 8.9 months, with trabecular line formation and RLL disappearance. Bone remodeling from the stress shielding effect continued beyond 14 months, leading to zones of bone resorption.

Level of evidence

Level III (retrospective study)

Publication and source details

Original title: Radiographic features of bone ingrowth in highly porous cementless total knee arthroplasty with minimum 2-year follow-up

Kai Chun Augustine Chan; Amy Cheung; Michelle Hilda Luk; Ka Chun Thomas Leung; Chun Man Lawrence Lau; XinYue Chang; Kwong Yuen Chiu; Henry Fu

Arthroplasty · 2026

© The Author(s) 20262026https://creativecommons.org/licenses/by/4.0/Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Repository JATS snapshot; version as supplied

Source retrieved: 2026-11-10T21:56:49.379411+00:00

DOI: 10.1186/s42836-026-00422-6 · PMC13455335