Vitamin D3 for Life

Live Enlightened

Research libraryVitamin D3 For Life
Study design and methods

Primary relevance to vitamin D Vitamin D is a stated subject of this paper.

Vitamin D is a stated subject of this paper; the supporting source evidence is shown below.

Why this paper is included

Supporting source evidence:

Scanning electron microscopy showed that the creation of vitamin D3 films is stable and homogeneous, while the in vivo results showed an increase in the biomechanical and microarchitectural capacity of the bone when vitamin D3 implants were used.

Source: Abstract. View original paper

Relevance classification does not establish study quality, causation or editorial approval.

Study design Study design awaiting verification.

Study design awaiting verification

The available source does not establish a sufficiently clear study design.

Meta-analysis unclear · Blinding unclear / not reported · Laboratory / cell research reported

How this paper was classified

Automatic source-based classification; awaiting editorial verification. This is not a quality score.

The work was carried out in two stages: (I) physicochemical and biological tests (in vivo) in order to characterize and validate the vitamin D3 surface as well as its ability to affect peri-implant bone biomechanics; and (II) in vitro experiments to characterize viability responses, interaction and cell mineralization capacity.

Source: Methods.

View supporting evidence in the original paper

What the study types mean
Systematic review
Uses explicit methods to identify, assess and summarise research on a defined question.
Scoping review
Maps the extent and characteristics of research on a topic.
Narrative review
Discusses existing research; systematic-review methods have not been established by this classification.
Review / evidence synthesis
Reviews existing research; the exact review methods need further assessment.
Randomised controlled trial
Assigns participants or groups to comparison interventions by chance.
Non-randomised intervention study
Examines an intervention without random allocation.
Cohort study
Examines exposures and outcomes over time within a defined group.
Case-control study
Compares people with an outcome against people without it, examining exposures.
Cross-sectional study
Examines a population at a particular point in time.
Observational study
Observes exposures and outcomes without assigning the exposure; the subtype is not established here.
Case report
Describes an individual case.
Case series
Describes a group of individual cases.
Secondary analysis
Analyses existing study data; this paper is not automatically another independent trial.
Laboratory study
Investigates biological processes in a laboratory setting.
Qualitative study
Examines experiences or meanings using qualitative methods.
Genetic instrumental-variable study
Uses genetic variation as an instrument to investigate relationships; this is not a randomised treatment trial.
Study protocol
Describes planned methods and is not evidence that the planned study has reported results.
Multiple reported designs
More than one design is explicitly reported; examine the supporting methods.
Study design awaiting verification
The available source does not establish a sufficiently clear study design.

Meta-analysis combines numerical results from studies. Blinding describes who was unaware of treatment allocation. Neither is a separate quality grade. Study design, vitamin D relevance and document format are independent filters.

Abstracts

Vitamin D3-Coated Surfaces and Their Role in Bone Repair and Peri-Implant Biomechanics

Study design awaiting verification · Biology · 2025

Original publication title

Vitamin D3-Coated Surfaces and Their Role in Bone Repair and Peri-Implant Biomechanics

Letícia Pitol-Palin; Isadora Castaldi Sousa; Juliani Caroline Ribeiro de Araújo; Fábio Roberto de Souza Batista; Bruna Kaori Namba Inoue; Paulo Roberto Botacin; Luana Marotta Reis de Vasconcellos; Paulo Noronha Lisboa-Filho; Roberta Okamoto

© 2025 by the authors.

Original publication · Publisher record · CC BY 4.0

Source wording retained. Formatting, section navigation and display-title punctuation adapted for this research record.

At a glance

What does the authors’ abstract report?

Simple Summary

This study explores the use of nanotechnologies applied to the surfaces of dental implants to optimize the bone repair process in normo-physiological rats. Thus, an administration system based on drug delivery was developed using vitamin D3 biomolecules in two concentrations (vD40µl and vD400µl) for physicochemical and in vitro characterization and, in addition, to observe their bone responses in an animal model. The physicochemical results showed the appropriate physical conditions obtained by creating a stable film with a uniform presence of biomolecules.

In addition, animal tests showed that the use of vitamin D3-functionalized surfaces promoted an increase in biomechanical capacity and peri-implant bone repaired microarchitecture.

Abstract

Dental rehabilitation with titanium implants may requires the optimization of techniques and materials when oral conditions affect the successful treatment result. Thus, this study aims to customize the surface of titanium implants with bioactive vitamin D3 molecules to increase the performance of bone repair. The surfaces were functionalized following the “dip-coating” incorporation method with vitamin D3 in a solution of 1000 I.U./goat. The work was carried out in two stages: (I) physicochemical and biological tests (in vivo) in order to characterize and validate the vitamin D3 surface as well as its ability to affect peri-implant bone biomechanics; and (II) in vitro experiments to characterize viability responses, interaction and cell mineralization capacity.

Scanning electron microscopy showed that the creation of vitamin D3 films is stable and homogeneous, while the in vivo results showed an increase in the biomechanical and microarchitectural capacity of the bone when vitamin D3 implants were used. Furthermore, the application of functionalized surfaces proved effective in promoting cell interaction and bone mineralization processes while preserving cell viability and capacity. In conclusion, the delivery of bioactive molecules based on vitamin D3 promotes changes in the surface microstructure of titanium, enabling an increase in the structural characteristics of bone tissue that result in an improvement in bone repair and peri-implant biomechanics.

Authors’ abstract

Simple Summary

This study explores the use of nanotechnologies applied to the surfaces of dental implants to optimize the bone repair process in normo-physiological rats. Thus, an administration system based on drug delivery was developed using vitamin D3 biomolecules in two concentrations (vD40µl and vD400µl) for physicochemical and in vitro characterization and, in addition, to observe their bone responses in an animal model. The physicochemical results showed the appropriate physical conditions obtained by creating a stable film with a uniform presence of biomolecules.

In addition, animal tests showed that the use of vitamin D3-functionalized surfaces promoted an increase in biomechanical capacity and peri-implant bone repaired microarchitecture.

Abstract

Dental rehabilitation with titanium implants may requires the optimization of techniques and materials when oral conditions affect the successful treatment result. Thus, this study aims to customize the surface of titanium implants with bioactive vitamin D3 molecules to increase the performance of bone repair. The surfaces were functionalized following the “dip-coating” incorporation method with vitamin D3 in a solution of 1000 I.U./goat. The work was carried out in two stages: (I) physicochemical and biological tests (in vivo) in order to characterize and validate the vitamin D3 surface as well as its ability to affect peri-implant bone biomechanics; and (II) in vitro experiments to characterize viability responses, interaction and cell mineralization capacity.

Scanning electron microscopy showed that the creation of vitamin D3 films is stable and homogeneous, while the in vivo results showed an increase in the biomechanical and microarchitectural capacity of the bone when vitamin D3 implants were used. Furthermore, the application of functionalized surfaces proved effective in promoting cell interaction and bone mineralization processes while preserving cell viability and capacity. In conclusion, the delivery of bioactive molecules based on vitamin D3 promotes changes in the surface microstructure of titanium, enabling an increase in the structural characteristics of bone tissue that result in an improvement in bone repair and peri-implant biomechanics.

Publication and source details

Original title: Vitamin D3-Coated Surfaces and Their Role in Bone Repair and Peri-Implant Biomechanics

Letícia Pitol-Palin; Isadora Castaldi Sousa; Juliani Caroline Ribeiro de Araújo; Fábio Roberto de Souza Batista; Bruna Kaori Namba Inoue; Paulo Roberto Botacin; Luana Marotta Reis de Vasconcellos; Paulo Noronha Lisboa-Filho; Roberta Okamoto

Biology · 2025

* Correspondence: leticia.p.palin@unesp.br (L.P.-P.); roberta.okamoto@unesp.br (R.O.)© 2025 by the authors.2025https://creativecommons.org/licenses/by/4.0/Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).São Paulo Research Foundation: FAPESP2021/01082-72021/12962-82021/13026-4CNPq: National Council for Scientific and Technological Development: INCT Saúde Oral e Odontologia406840/2022-9This study was financially supported by the São Paulo Research Foundation: FAPESP (processes numbers: 2021/01082-7, 2021/12962-8 and 2021/13026-4). This study was supported by the CNPq: National Council for Scientific and Technological Development: INCT Saúde Oral e Odontologia: Grants n. 406840/2022-9.

Repository JATS snapshot; version as supplied

Source retrieved: 2026-11-11T02:06:16.066730+00:00

DOI: 10.3390/biology14050476 · PMC12108634